Bürkert 8619 multiCELL WM AC, Руководство по эксплуатации

Страница: 140 / 194

8.11.10 Entering the max. value of the chlorine measuring range
Refer to section 8.9 to access the "Calibration" menu.
Range ENTERING Calibration Mx:Inputs AI1/AI2 Mode:chlorine
→
Enter the max. value of the measuring range indicated on the name plate of the chlorine sensor.
8.11.11 Reading the date of the last calibration of an analogue
input
Refer to section 8.9 to access the "Calibration" menu.
Calibration intervals
Last READING
Calibration Mx:Inputs AI1/AI2 Mode:general
Mode:chlorine
8.11.12 Entering the periodicity of the calibrations
Refer to section 8.9 to access the "Calibration" menu.
Calibration intervals
Calibration ENTERING Calibration Mx:Inputs AI1/AI2 Mode:general
Mode:chlorine
Reset Cali-
bration Timer
Yes/No
On each due date, the 8619 generates a "maintenance" event, signalled on the display by the icon , and a
"warning" event, signalled on the display by the icon
.
If a calibration is successfully performed, the events disappear and the countdown of days restart.
→
Enter the number of days between two calibration reminders. Enter "0000 days" to disable this notification.
→
Select "Reset Calibration Timer" -> "Yes" to manually reset the delay until the next calibration.
8.11.13 Reading the date of the last maintenance of an analogue
input
Refer to section 8.9 to access the "Calibration" menu.
Calibration intervals
Last READING Calibration Mx:Inputs AI1/AI2 Mode:general
Mode:chlorine
140
Adjustmentandcommissioning
Type 8619
English