Burkert Robolux 2036, Быстрый старт

Страница: 11 / 52

11
Assembly
Type 2036
5.8 Valve marking
Type label
Marking and warning
notices in Ex area
Actuator orientation
marking
Port connection
markings
Valve body labeling
Bürkert company logo, Orifice and connection dimensions
Material, charge, manufacturing order and serial No.
Fig. 4: Valve marking
5.8.1 Type label
Identification
number
Type - Size - Design
- Diaphragm material
Actuator 1 - Actuator
2 - Pilot pressure
Max. medium pressure -
medium temperature
Connection dimensions
Company logo
Date of manufacture
Fig. 5: Type label
6 asseMBly
6.1 safety instructions
Danger!
risk of injury from high pressure in the equipment/device.
▶
Before working on equipment or device, switch off the pressure
and deaerate/drain lines.
Warning!
risk of injury from improper assembly.
▶
Installation must only be carried out by authorized technicians
and with the appropriate tools.
risk of injury from unintentional activation of the system and
uncontrolled restart.
▶
Secure system from unintentional activation.
▶
Following assembly, ensure a controlled restart.
6.2 Before installation
• Before connecting the valve, ensure the pipelines are flush.
• Pay attention to the flow direction.
6.2.1 installation position
• The piston-controlled diaphragm valve can be installed in any
position, preferably with connection B downwards.
• Installation for self-drainage of the body:
see chapter "Valve self-draining" in operating instruction.
english