46
How to do the settings
Type 8098
9.3
Available login user levels
The following 4 login user levels are available to operate or adjust the device:
•
the basic user level, which is the level with the least functions,
•
the
Advanced User
user level,
•
the
Installer
user level (default),
•
the
Bürkert
user level.
By default, the device adjustment is not protected by passwords.
Table 7 shows the symbol displayed in the information bar, depending on the user level that is active on the
device, and what can be done with each type of user level.
Symbol
8)
User level
Description
No symbol
Basic user
•
No password is required.
•
The menu items with the symbol
enable read-only access.
•
Not all the menu items that are available with a higher user level are
displayed.
Advanced
user
•
Password required, if the password protection is active. Default password is
005678.
•
The menu items with the symbol
enable read-only access.
•
Not all the menu items that are available with a higher user level are
displayed.
Installer
•
Password required, if the password protection is active. Default password is
001946.
•
This level is active by default (and by default, password protection is
switched off).
•
All the available menu items can be adjusted.
Bürkert
•
Password required, if the password protection is active.
•
Only for Bürkert service.
Table 7:
Possible login user levels
8) Displayed in the information bar, only if the adjustment is protected through passwords.
→
If you have forgotten your passwords, you can restore the default passwords with the Type 8920 Bürkert
Communicator software. Refer to the related Operating Instructions.
9.4
Default settings
You can find the default settings of the device in the CANopen supplement for the Type 8098 at
www.
burkert.com
→
Before making any changes to the settings, use the Bürkert Communicator software to print a pdf file
with all the default settings of the device.
English
