41
Electrical installation
Type 8098
8.3
Connecting the device to a power supply
The device is wired in the factory to be easily energized through the M12 male connector.
→
Variant without outputs: connect the device to a 12 – 35 V DC power supply through the 5-pin M12 male
connector; Refer to chpt.
8.4.
→
Variant with outputs: connect the device to a 12 – 35 V DC power supply through the 8-pin M12 male
connector; Refer to chpt.
8.5.
The minimum voltage to be supplied depends on the fluid temperature and on the ambient operating tem
-
perature: see
.
0
10
20
30
40
50
60
70
80
-20
0
20
40
60
80
100
120
140
160
-10
-20
5
10
15
20
25
30
35
Fluid temperature °C
Ambient temperature °C
Supply voltage V DC
Voltage not allowed
Temperature authorized for a limited duration
Figure 12:
Minimum supply voltage depending on the ambient temperature and the fluid temperature
English
