Burkert Flowave 8098, Руководство по эксплуатации

Страница: 99 / 354

99
Display module settings
Type 8098 FLOWave L
11.3 Menu Parameter
11.3.1 Adjusting the brightness of the display backlight
The brightness of the display is automatically reduced if the internal device temperature is higher
than +60 °C.
If the internal device temperature is higher than +60 °C, the brightness of the display is automati -
cally reduced to 50 % and the backlight is even switched off 5 minutes after the last operation. If the
temperature is higher than 80 °C the backlight is automatically switched off (0 %). If the display is
operated, the backlight is put on for 30 s with a brightness of 50 %.
You can set 2 different values for the backlight brightness:
• 1 value if the sceen saver is inactive,
• 1 value if the sceen saver is active. Refer to chapter 11.3.4 .
To set the backlight brightness if the screen saver is inactive, do the following:
→
Go to the CONFIGURATION view.
→
Display
→
Confirm to access the Parameter view.
→
Brightness
→
Adjust the brightness of the backlight.
→
Save.
The brightness of the backlight is adjusted.
11.3.2 Adjusting the contrast of the display
→
Go to the CONFIGURATION view.
→
Display
→
Confirm to access the Parameter view.
→
Contrast
→
Adjust the contrast.
→
Save.
The contrast of the display is adjusted.
English