Burkert Flowave 8098, Руководство по эксплуатации

Страница: 100 / 354

100
Display module settings
Type 8098 FLOWave L
11.3.3 Adjusting the activation delay of the screen saver
The screen saver allows you to:
• Save energy.
• Automatically go back to View 1.
• And, if the adjustment is protected through passwords, to be automatically logged out from an
Advanced
user
, an
Installer
or a
Bürkert
user level after the activation delay of the screen saver has elapsed.
→
Go to the CONFIGURATION view.
→
Display
→
Confirm to access the
Parameter
view.
→
Screen saver .
→
Wait time .
→
Choose the time of inactivity of the display after which the screen saver is activated.
Save.
The activation delay of the screen saver is adjusted.
11.3.4 Adjusting the brightness of the backlight by active screen
saver
You can set 2 different values for the backlight brightness:
• 1 value if the sceen saver is inactive, refer to chapter 11.3.1 .
• 1 value if the sceen saver is active.
To set the backlight brightness if the screen saver is active, do the following:
→
Go to the CONFIGURATION view.
→
Display
→
Confirm to access the Parameter view.
→
Screen saver .
→
Brightness
→
Adjust the brightness of the backlight. Save.
The brightness of the backlight is adjusted.
English