Burkert Flowave 8098, Руководство по эксплуатации

Страница: 89 / 354

89
How to do the settings
Type 8098 FLOWave L
To delete a shortcut from the context menu:
→
Press and hold to open the context menu.
→
By using the shortcut to be deleted, go to the view or menu item.
→
Press and hold to open the context menu.
→
Delete shortcut
Confirm.
The shortcut to this view or to this menu item is deleted from the context menu.
10.7.3 Reading out the messages generated by the device
The device generates messages to inform you, for example, that a problem has occurred or that a process
value limit has been reached.
→
To read out the messages in the Bürkert Communicator software, refer to the Operating Instructions
Type 8920, available on the internet at country.burkert.com .
Do the following to display the generated messages on the display module:
→
Long press, to open the context menu.
→
Messages overview Confirm.
The generated messages are displayed. Some messages can be acknowledged.
10.7.4 Changing the login user level if the adjustment is not
protected through passwords
By default:
• the
Installer user level is active on the device,
• the adjustment is not protected through passwords,
• the symbol related to the
Installer
user level is not displayed in the information bar.
You can only change to the Bürkert user level.
→
To change the login user level in the Bürkert Communicator software, refer to the Operating Instructions
Type 8920, available on the internet at country.burkert.com .
Do the following to change the login user level on the display module:
→
Long press, to open the context menu.
→
Change user level Confirm.
→
Choose the Bürkert user level Confirm.
→
Enter the password Confirm.
The user level is changed.
→
To activate the adjustment protection through passwords, refer to chapter 12.15 .
English