Burkert Flowave 8098, Руководство по эксплуатации

Страница: 124 / 354

124
General settings – Parameter
Type 8098 FLOWave L
12.15 Activating the adjustment protection through
passwords
By default, the device adjustment is not protected by passwords.
The default user level is the
Installer level.
To activate the adjustment protection through passwords, do the following:
→
Go to the CONFIGURATION view
→
General settings
→
Confirm to access the Parameter view.
→
Passwords
→
Password protection
→
Choose On
→
Save
The protection through passwords is enabled.
12.16 Changing the protection passwords of the
Advanced
user
and
Installer
user levels
If the protection through passwords is active, you can change the passwords of the Advanced user and
Installer user levels.
The lowest user level is not protected through a password.
To change the passwords of the
Advanced user and Installer user levels, do the following:
→
Go to the CONFIGURATION view
→
General settings
→
Confirm to access the
Parameter
view.
→
Passwords
→
Change passwords
→
Advanced user or Installer
→
Set the new password.
→
Save
The password is changed.
→
If you have forgotten your passwords, you can restore the default passwords with the Type 8920 Com-
municator software.
English