Burkert 20014453, Быстрый старт

Страница: 11 / 22

11
Installation
Type 3281
7 INSTALLATION
DANGER
Risk of injury due to high pressure in the system or device.
▶
Before working on the system or device, switch off the pressure
and deaerate lines.
Risk of injury from electric shock.
▶
Before working on the system or device, switch off the power
supply and secure to prevent reactivation.
WARNING
Risk of injury due to improper installation.
▶
Installation may only be performed by trained technical per-
sonnel with suitable tools.
▶
Secure the system against unintentional activation.
▶
Following installation, ensure a controlled restart.
7.1 Installing the device fluidically
Installation position: arbitrary, preferably actuator at the top and
with vertical installation position actuator cover upwards .
→
Clean pipelines and flange connections.
→ Install a dirt trap upstream of the valve inlet (≤ 0.3 mm).
NOTE
Caution: risk of breakage.
▶
Do not use the plastic actuator cover as a lever arm.
→
Hold the device on the housing using an appropriate tool (e.g.
open-end wrench) and screw into the pipeline.
→
Note the flow direction.
The digits on the valve body indicate the direction of flow
(flow direction always under valve seat 2
→
1).
7.2 Mounting the valve seat
Valve seat set consists of valve seat and graphite seal.
WARNING
Risk of injury from improper installation.
▶
Only mount the valve seat with a special assembly tool.
▶
Observe the tightening torque.
When mounting the valve seat, the actuator must be
removed. The work steps required are described in
chapter “7.4.1”.
→ Screw suitable tool insert into the assembly tool.
The suitable assembly tool (order number 625604) is not
included in the valve set and must be ordered separately.
english