9
COMPATIBILITY
If you plan to use your Plus-X VSWR unit(s) with an Arcturus or ARC Plus System, make sure the system
firmware and AutoLoad Plus software versions are updated to the minimum release versions provided in
Table 4. If you plan to use AutoPilot software with your Plus-X VSWR unit(s), make sure your AutoPilot
software is updated to the minimum release version provided in Table 4.
Firmware / Software
Version
Arcturus firmware
5.0.0.0
ARC Plus firmware
2.1.0
AutoLoad Plus software 2.0.0
AutoPilot Software
2.5.0
Table 4. Firmware compatibility
NETWORK CONNECTIVITY
Before installing the Plus-X VSWR, have the following information ready to enter in to the Plus-X VSWR network
settings window when you get to that step in the process:
•
A unique static IP address for the Plus-X VSWR you are installing
•
The subnet mask and gateway address for your LAN
•
The IP address of your Arcturus or ARC Plus system, if applicable
LOG ON FOR THE FIRST TIME
The process to establish communication with the Plus-X VSWR for the very first time depends on whether you
have a Dynamic Host Configuration Protocol (DHCP) enabled network.
USING A DHCP ENABLED NETWORK
If your network has DHCP, follow the steps below or else proceed to
1.
Plug one Plus-X VSWR into your network switch.
2.
Open a web browser and type in the following address in the browser address bar: <plusxvswr/>
3.
A window will appear asking to enter in a password for the Plus-X VSWR.
