sPinLock 200
|
March 2018
01- AN/DSW English
ǀ
3
Important: A new code can be set any time the lock is in
the disengaged state. Only the code used to engage the lock
can be used to disengage it again. This makes the lock sui-
table for use by several persons.
Turning the knob 90° counterclockwise to the close
position will end the configuration process. Turning the
number dials while the knob is in the close position will
engage the lock.
Finding the code by masterkey
1.
Inserting the master key
Insert the master key an turn it 90° clockwise to align it
with the open position.
2.
Turning the number dials
Turn the number dials carefully until they stop. It is
important to turn the dials bottom-up one by one, starting
from the leftmost dial and working your way toward the
right.
3.
Removing the masterkey
Turn the masterkey 90° counterclockwise and pull it out. In
this state, you will be able to read out the current code and
open the lock.
Installation
Mounting hole: 16 x 19 mm
BURG F.W. Lüling KG
Hegestraße 6
58300 Wetter (Germany)
Fon + 49 (0) 2335 / 63 08-0
Fax + 49 (0) 2335 / 63 08-999
[email protected]
www.burg.de