
EN - 26
Remove the metal grease filter
1
2
1.
Filter cover
2.
Air extraction unit
1
1.
Metal grease filter
• Remove the metal grease filter (1) by
moving it in the direction of the arrow.
Make sure the metal grease filter does
not fall off.
• Lay the metal grease filter forward and
remove it.
• Rinse the metal grease filter by hand or
in the dishwasher.
Manual Cleaning
Damage due to incorrect cleaning or
due to the use of unsuitable cleaning
agents!
• Let the metal grease filter soak in warm
soap water and clean it using a soft
brush.
• Rinse with water the metal grease filter
with warm water.
• Place the metal grease filter loosely and
vertically without adding other tableware
into the dishwasher.
• Start any program with a temperature of
no higher than 55°C.
• Due to the cleaning in the dishwasher,
the filter parts may experience slight
changes in their colour. This does not
affect function or perfor-mance to the
metal grease filter.
After cleaning
Put the metal grease filter on an absorbent
pad.
Inserting the metal grease filter
1
1.
Metal grease filter
• Move the metal grease filter in the
direction of the arrow and insert it into
the air extraction duct.
• Clearing the warning for cleaning the
metal grease filter.
• Close the filter cover of the air extraction
unit.
Cleaning the drip container
• To collect water and food waste, the air
extraction unit has a container a slot
inside.
• Pull up the container inside the air
extraction unit slot.
• After cleaning, insert the container.
The drip container can be cleaned in
the dishwasher.
5.3
CleaninG or rePlaCinG aCtiVateD
CharCoal filter (reCirCulation only)
1
2
1.
Activated charcoal filter housing
2.
Activated charcoal filter with frame
Содержание BML78
