Burg BGF90AK, Инструкции по эксплуатации и монтажу

Страница: 38 / 71

• Use connection method “C” for a mechanical gas connection with a ½ inch
male thread (on the appliance end) in Letonia and Luxembourg.
You can choose to use this connection method in some areas of France, Algeria,
Spain, Portugal and Italy.
• Use connection method “D” for all types of gas connection in the United Kingdom
and Ireland with a ½ inch male thread (on the appliance end).
CAUTION: Make sure that the flexible gas hose doesn't pass behind or
make contact with objects that may heat the hose up or have the potential
to cause a flame.
IMPORTANT
• The appliance should be installed, regulated and adapted to function with other
types of gas by a QUALIFIED INSTALLATION ENGINEER.
• Failure to comply with this condition will render the guarantee invalid.
• The appliance must be installed in compliance with regulations in force.
• Installation engineers must comply to current laws in force concerning ventilation
and evacuation of exhaust gases.
• Always unplug the appliance before carrying out any maintenance or repairs.
• Minimum distance between the appliance and combustible premises must be 20
mm.
• After the connection had been it has to be tested.
• This test can be done by applying a soapy liquid to the connection. No bubble should
appear. If there are bubbles, check the connection joint and recheck it if necessary.
• For all gas connections, make sure that the connection parts and gas delivery
components are in accordance with local and international requirements.
DO NOT USE NAKED FLAME TO CHECK FOR GAS LEAKS
•
13