Bedienungsanleitung / User manual
VDC-612ID
_________________________________________________________________________________
- 54 -
5.5 Auto Scan Set
Press keys 66 + PRESET to call-up the auto scan settings.
Auto Scan Set: Start angle:
Press FOCUS FAR to set a start position. Then move the joystick to the desired
position. Exit this page by pressing FOCUS FAR again.
Auto Scan Set: End angle:
Press FOCUS FAR to set an end position. Then move the joystick to the desired
position. Exit this page by pressing FOCUS FAR again.
Auto Scan Set: Direction:
Two directions are available for AUTO SCAN“: CW and CCW. You can select them
by moving the joystick left/right.
- CW : clockwise (default setting)
- CCW: counter-clockwise
Auto Scan Set: Endless:
„AUTO SCAN“ can be used as an endless rotation. Move the joystick right to enable
„ON“. Default setting is OFF.
Auto Scan Set: Speed:
„AUTO SCAN“ speeds can be set from 5°/sec to 35°/sec.
Default setting is 10°/sec.
Auto Scan Set: Dwell Time:
To select „Dwell Time“, move the joystick left/right. The „Dwell Time“ can be set to
1
–30 seconds.
Default setting is 3 seconds.
Default setting