ProfiScale LEVEL PS 7061 E
3
“CAL”: calibration
Hold the inclination angle meter in a horizontal (or vertical) position and
press the “CAL” button. The LCD displays “CAL1”, rotate the device
through 180 ° horizontally (or vertically). Then leave it in this position for
approx. 10 seconds and press the “CAL” button again. The LCD now shows
“CAL2”. The calibration process is now complete.
Disposing of the device
Dear Customer,
please help to reduce waste. Should you decide to dispose of the device,
bear in mind that many of the components it contains are made from
valuable material that can be recycled.
Please do not throw the device into the normal waste bin. Contact the
responsible office in your area and ask about collection points for electrical
waste.
Printing and typesetting errors excepted.
We reserve the right to make technical changes.
