16 | English
PLUG 2140
3. Scan the QR code, printed on this
accessory, by App. After scanning, you
may rename the accessory, e.g. „living
room door“ Confirm your entry by
tapping on the green check mark.
4. The APP will auto recognize this
accessory. Please wait until the app
notes the successful add.
5. Plug the smartBURG Plug on the socket or
wall plug, press the LED button and LED will
on. Device is ready for use now
Use the plug
1. Manual turn ON/OFF
Press the button, with LED indicator, on
Plug to switch between power on and
power off mode.
2. Remote turn ON/OFF
To control the Plug remotely:
Start the App and press „more“ , ,
expand the toolbar by ,
if Plug isn’t already added to your favorites,
start setup by „Plug“
Now you can control the Plug remotely or
check the actual state of it.
3. Reset the Plug
Keep holding the reset button in
10 seconds, the smart switch would be
reset as the LED indicator keep flashing