22 | English
CONTACT 2032
Contact 2032
English | 23
Product description
The BURGsmart PROTECT Contact 2032 is
intended for the detection and status signalling
of open/closed doors, windows, cabinets,
etc. indoors. Thanks to the energy-saving
processor, up to 4000 switching cycles or up
to 3 years can pass before the battery needs to
be changed. The system informs you about the
current battery level in the app. By linking with
other BURGsmart PROTECT components, you
can create scenarios.
Tip:
If necessary, change the position of the
transmitter and the magnet to be able to use
the detector even on very narrow frames.
Note:
The detector is not waterproof and is
intended for indoor use. Warranty claims are
void in the event of improper use. 2.4 GHz
Wi-Fi and an internet connection are required.
Scope of delivery
1x CONTACT 2032
2x LR6 AA 1.5V batteries
1x set of spacers with adhesive backing
1x instructions
Equipment features
• Wi-Fi door/window contact sensor
• Including spaces to compensate for any gap
on window and door frames
•
Operation with 2x AA LR6 1.5V batteries, up
to 3 years of standby operation
• Installation without screws
• Compatible with 2.4 GHz Wi-Fi, standard
IEEE 802.11 b/g/n
• Configure smart scenes, for example, in
conjunction with the NOISE 2162 alarm
siren
• App operation, push notification in
case of alarm or low battery
• An internet connection is required for
operation
• Can be used alone or in conjunction with
BURGsmart PROTECT devices