TRSE 10
English |
3
Actions in programming mode
Changing Pincode
– Type numbers 22 (
c
hange
c
ode), then press „On / Enter“.
– Type your new code (6 digits) and confirm with „On / Enter“.
– Enter your new code again and confirm with „On / Enter“.
The yellow LED
(Entry / programming light)
flashes during the whole process.
The green LED
(Confirmation light)
flashes in case of a successful change.
Leave programming mode by pressing the „Clear” button twice.
Saving fingers
– Type numbers 23 (
a
dd
f
inger), then press „On / Enter“. The yellow LED
(Entry / programming light) will stay
on.
– Move your finger over the sensor several times. During this, the yellow LED
goes off whenever you have moved your finger over the sensor, until the
Confirmation light
goes on briefly.
If t
he yellow LED is flashing, as you are still in the programming mode.
Leave programming mode by pressing the „Clear” button twice or proceed
with saving an additional finger.
Having saved a finger, you can continue by saving additional fingers
if the yellow
LED
is still flashing
:
– Type numbers 23, then press „On / Enter“. The yellow LED
will stay
on.
– Move another finger over the sensor following the above indicated instructions.
Leave programming mode by pressing the „Clear” button twice.
Deleting all fingers
– Type numbers 33 (
d
elete
f
inger), then press „On / Enter“.
The green LED
(Confirmation light)
flashes in case of a successful action.
The yellow LED
(Entry / programming light)
flashes during the whole process.
Leave programming mode by pressing the „Clear” button twice.
Disposal of batteries
Dear Customer,
Please help us avoid unnecessary waste. Should you intend to dispose of this
device at any time, please remember that many components of this device
contain valuable materials, which can be recycled. Please do not throw out the
device as general waste, but rather obtain information on the collecting points for
electrical waste from the responsible authority of you municipality.
The dustbin means:
Empty batteries or accumulators may not be disposed of in
household waste. Please carry your batteries / accumulators to an
appropriate shop or to a recycling yard of your municipality.
Such return is free of charge and legally imposed.
Replacement of batteries
1
2
3
4
Batteries: 3 x 1,5 V Mignon (LR6)
Errors and changes reserved.
Содержание TRSE 10
Страница 4: ...www burgsecurity com au ...
