26 | English
Motion 2012
Motion 2012
English | 27
Technical details
Type of battery
2x CR123A
Alternative permanent
power supply
=5V DC MicroUSB, 1A
Coverage
120°
Max. detection distance
10 m
Air humidity
measurement range
0 % ~ 99 % ± 10 %
Temperature
measurement range
-10°C – 40°C ± 10 %
Max. range outside
< 50 m*
Max. range inside
< 20 m*
Frequency band
2.4 GHz
Supported radio
standards
IEEE 802.11b/g/n
Max. output
<10 mW (10 dBm)
Working temp. range
0°C – 40°C
Air humidity
20 % – 85 %
Weight
160 g
Dimensions (H x W x D)
excluding adhesive strips
56 x 56 x 68 mm
Installation instructions
1. Check the strength of the Wi-Fi signal at the
site of installation with your smartphone.
The reception quality should be at least two
graduation marks to be able to guarantee
an alarm.
2. First remove the battery strap from the
sensor or operate the sensor with the
enclosed USB cable and a USB power
supply*.
3. Set up the sensor in the app before
installation and test the function.
4. Fasten the detector with adhesive tape if the
surface allows a secure hold. Otherwise, use
the enclosed screws and dowels to fix the
detector in the desired position. Use a 4 mm
drill bit for the hole. Mark the drilling depth
on the drill, e.g. with a pen or adhesive
tape. Before drilling, check whether there is
a risk of hitting water, gas or electricity lines,
for instance.
5. Avoid installation on metallic surfaces
and near live cables, as these may impair
the function.
Note: Before mounting, please test whether
the device works reliably in the desired
position.
*
The actual range depends on the circumstances on site.
*Not included in delivery