14. Use Option Mode
This allows the user choose between various ways for the oven to operate.
1) Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter
this mode.
2)
displays "OP: - -".
3) Press any number button to enter related mode setting.
For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays.
If you want to change, keep pressing "2",
displays "OP:20", "OP:21","OP:22",
"OP:23", "OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
5) During setting process, press " " to enter Door Open Mode. Close the door will enter
Ready Mode.
6) If " " button not pressed at the last step, the program cannot be saved but stay at
previous way.
15. Service Mode
1) Open the oven door and press "3" pad for 5 seconds to enter service mode.
2)
displays "SE
".
3) To check the times of closing or opening the door, just press number button "3",
will display the times.
4) If press " 1 " pad for Tube Hours.
If press " 2 " pad for Tube Cycles.
If press " 3 " pad for Door Cycles..
If press " 4 " pad to Clear service information.
Only for some medels:
If press " 5 " pad to run Top Mag. Oven displays amps.
If press " 6 " pad to run Bottom Mag. Oven displays amps.
5) Press " " to enter Door Open Mode. Close the door will enter Ready Mode.
the screen
The screen
the screen
The screen
RVICE
16. Factory-default setting
1) Press " " and " 0 ", the buzzer sounds once,and the screen wil l display "CHECK". I f i t is
actory-default setting,
will display " 11 ",after three seconds,
turn
ode
In the Ready Mode,pressing " " an " 0 " to factory-default setting.
d
the oven
.
Press" " to cancel the display ang back to ready back in the process
he factory-default setting,
will display " 00 ", press" "
will display " CLEAR ".
2) If do not press " " when the
display " 00 ",the setting will cancel.
the screen
the screen
screen
Note:
actort-default setting
operation
restore all configure to f
.
Be careful in the
as it will
the buzzer sounds once,
isplay "
"
11 or
"
"
00 .
after self-testing, the screen will d
to the factory-default setting, the screen
to the ready m
of display. If not in t
in the f
19
