INTRODUCTION
.
To ensure you obtain full benefits from your new oven:
• Please read this instruction booklet carefully, and follow all instructions.
•
If you are unsure of any aspect of the installation, use or performance of your oven,
please contact the after sales number shown on the back page
.
SPECIFICATIONS
Model
CTCO02
SKU Number
444441151
Dimensions
Height
395mm
Width
610mm
Depth
545mm
Weight
24kg
Voltage
230V ~50Hz
Power rating
2400W
INSTALLATION
Installation Requirements
I
t is essential that this appliance is installed correctly. Installation should comply with all
local electrical, and health and safety requirements.
WEEE directive registration no. WEE/DK0059TT
At end of unit life, dispose of appliance and any replacement parts in a safe
manner, via a licenced waste handler. Units are designed to be dismantled
easily and recycling of all material is encouraged whenever practicable.
Before Connection to Power Supply:
Remove all packaging.
Check the oven and parts for damage. Report any damage immediately to the carrier or
supplier.
Remove any protective plastic coating from the outer panels.
Check the following parts have been supplied with your oven:
2 x Oven shelves
Check the available power supply corresponds to that shown on the oven rating label.
Location:
This oven is for indoor use only.
Do not install the oven in a cabinet, it is for counter top use only. Allow at least 200mm
clearance above the oven.
The oven is only to be installed in locations where its use and maintenance is restricted to
trained personnel.
The mains lead should reach from the mains socket without straining the connections.
Do not let the mains lead hang over the edge of the table or counter, and keep it away
from any hot surfaces.
Do not let the mains lead run across an open space
Do not place the oven where the mains lead could fall into a sink.
Do not place the oven near a hot gas or electric burner.
Ensure the oven is level both from side to side and front to back, to ensure even cooking.
There are adjustable feet on each corner, tighten the locknuts after adjustment.
