9
www.bunn.com
bunn
-
o
-
matic
®
corporation
in
the
united
states
:
1400 Stevenson Drive, Springfield, IL 62703
900 E. Townline Rd., Creston, Iowa 50801
1-800-352-BUNN (2866)
in
canada
:
280 Industrial Parkway S., Aurora, Ontario L4G 3T9
1-800-263-2256
To receive full assistance, have the Model and Date Code
(located on the back of your brewer) ready when calling.
AUTHORIZED SERVICE
TROUBLESHOOTING
note
:
Do not disassemble. There are no user serviceable parts inside the brewer.
problem
suggestions
Takes too long
to brew
• Mineral deposits may be present in your brewer. See Deep Cleaning
and Cleaning the Sprayhead on page 6.
Brewer only
brews water
• Make sure a pod is in the Pod Drawer.
Water speed
varies during
brew
• The Pulse Brew Button has been pressed. During the brew, water
flow will vary to properly steep tea or for stronger coffee.
Water leaks
out around the
Sprayhead
• The Sprayhead may be clogged, loose or the seal may be damaged.
Please refer to Cleaning the Sprayhead, Reassembling the Sprayhead/
Seal and Inspecting the Sprayhead Seal on pages 6 and 7.
The Pod Holder
will not come out
of the brewer
• The pod in the Pod Drawer may be swelled to a point where the
drawer does not slide out easily. Wait 10 minutes for the pressure to
drop and try carefully removing the Pod Drawer again.
Water leaks
out around the
Pod Drawer
• Make sure the pod is fully seated in the Pod Drawer cavity.
Off taste is
detected
• Perform Basic Cleaning and Deep Cleaning on page 6.
• Remove used pods from pod drawer after each brew. Do not leave
used pods in the pod drawer for extended periods of time.