Bunn My Cafe AP Скачать руководство пользователя страница 6

Page 6

-1000

213.8

101.0

200

93.3

-500

212.9

100.5

200

93.3

0

212.0

100.0

200

93.3

500

211.1

99.5

200

93.3

1000

210.2

99.0

200

93.3

1500

209.3

98.5

200

93.3

2000

208.4

98.0

200

93.3

2500

207.4

97.4

200

93.3

3000

206.5

96.9

199

92.8

3500

205.6

96.4

198

92.2

4000

204.7

95.9

197

91.7

4500

203.8

95.4

196

91.1

5000

202.9

94.9

195

90.6

5500

201.9

94.4

195

90.6

6000

201.0

93.9

194

90.0

6500

200.1

93.4

193

89.4

7000

199.2

92.9

192

88.9

7500

198.3

92.4

191

88.3

8000

197.4

91.9

190

87.8

8500

196.5

91.4

189

87.2

9000

195.5

90.8

188

86.7

9500

194.6

90.3

187

86.1

10000

193.7

89.8

186

85.6

Brew water temperature is factory set at 200

o

 F (93.3

o

 C)

Areas of high altitude will require lowering this tempera-
ture to prevent boiling.  This chart should be used as a
guide when readjusting the brew water temperature.

Altitude

(Feet)

Boiling point

of water

o

 F          

o

 C

Recommended

water temperature

o

 F          

o

 C

1. 

Place a large empty cup (10 oz. or more) under the brew 
chamber.

2. 

Connect the brewer to the power source. 

3. 

Water will fl ow into the tank and stop when the tank is 
fi lled to its capacity.

4. 

Wait approximately ten minutes for the water in the tank 
to heat to the proper temperature. Display will show  

"HEATING"

 until tank reaches it's operating temperature. 

Some water will drip from the brew chamber during 
this time; this is due to expansion and should not occur 
thereafter.

5. 

When heated, open door, then close door with switch 
(see illustration).

6.  Press the large Brew switch. Water will fl ow into the 

cup. When fi nished, discard contents of cup.

7. 

Water volumes and fl ow settings have been preset at the 
factory. Refer to adjustments for the Set Brew Volumes 
section of this manual should the volume need to be 
increased or decreased.

8. 

The brewer is now ready for use in accordance with the 
instructions for Coffee Brewing.

INITIAL SET-UP

OPEN/CLOSE

This is used to open 

or close the pod 

holder door.

LARGE BREW

 

Preset but can be 

adjusted.

HOT WATER

Push and hold for dis-

pensing hot water only 

(Max 10 oz).

SMALL BREW

Preset but can be ad-

justed.

OPERATING CONTROLS

41167.2 121710

Содержание My Cafe AP
















Отзывы: