background image

3

CONTENTS

 

User Notices .............................................................3

 

Electrical Requirements ............................................4

 

CE requirements .......................................................4

 

Operating Controls ....................................................4

 

Preventive Maintenance ............................................4

 Cleaning ....................................................................5

 

Coffee Grinding .........................................................5

 

Initial Set-Up .............................................................6

 Adjustments ..............................................................6

INTRODUCTION

 

The LPGA will store up to six pounds of whole bean coffee and grind it to a preset grind and amount into an awaiting 

funnel and filter from most commercial drip coffee brewers. The equipment is only for indoor use on a sturdy counter or 

shelf. Adequate space must be available above the grinder to raise the lid when adding beans. Use only with whole bean 

coffee.

 

The grind is preset at the factory to drip specifications as set forth by the United States Department of Commerce and 

adopted by the Coffee Brewing Center of the Pan American Coffee Bureau. Adjustments may be made to alter both the 

amount and grind from the factory setting.

USER NOTICES

Carefully read and follow all notices on the grinder and in this manual.  They were written for your protection. 

All notices on the grinder are to be kept in good condition.  Replace any unreadable or damaged labels

.

27091.1 061112

#20545.0000

KEEP FINGERS AND

FOREIGN OBJECTS

OUT OF HOPPER

OR CHUTE OPENING.

PERSONAL INJURY

HAZARD.

#05876.0000

#37881.0000

00824.0002

Содержание LPGA







Отзывы: