Bunn HB, Инструкция по использованию и уходу

Страница: 8 / 22

NOTE: Our friendly Customer Service Group is ready to help at 1-800-352-BUNN (2866) or online at www.bunn.com
suggestions
TROUBLESHOOTING
problem suggestions
Brewer does not
turn on • Make sure brewer is plugged into a working outlet.
• Press the Brew button to begin brew and red light will illuminate.
Coffee is not
brewing • Make sure brewer is plugged into a working outlet.
• Make sure brewer is filled with water. A minimum of 4 cups (20oz) is
needed to begin brewing.
• Make sure brewer clock is set.
• Press the Brew button to begin brew and red light will illuminate.
• Check to see if Auto-Start time was programmed accurately.
Brew time is
longer than usual • Check Sprayhead holes for debris. Clean Sprayhead and perform
Brewer Maintenance, see instructions on page 5.
Brew funnel
overflows • Be sure Brew Funnel is properly inserted.
• Use BUNN paper filters – they are taller to prevent overflow.
• Be sure Sprayhead is in place.
• If overflow continues, contact BUNN for a Flow Restrictor Sprayhead.
Warmer plate
stays on after
brewing • Warmer Plate automatically shuts off after 2 hours. To shut off
manually, push the Brew button (red light will turn off).
• To turn Warmer Plate back on, press & hold Brew button for 3 seconds.
Programmed
Auto-Start did not
work • Make sure AM/PM was accurately selected.
• Reprogram for Daylight Savings Time or a power outage if needed.
• Make sure Auto-Start button is illuminated.
‘CLEAN’ indicator
light appears on
screen • Perform Brewer Maintenance, see instructions on page 5.
• To reset “CLEAN” indicator, press and hold “H” and “M” buttons for
3 seconds during idle.
Water drips through
prior to completing
Heating or before
programmed time • Lime or mineral build-up may prevent the valve between the Top Tank and
Sprayhead from properly closing. Perform Brewer Maintenance,
see instructions on page 5.
Off taste is
detected • Perform Brewer Maintenance, see instructions on page 5.
Error Code EE:03
Brewer did not
brew all cups
• The brewer did not detect water. Check the top tank to make sure brewer is
filled with water.
• A minimum of 4 cups (20 oz) is needed to begin brewing.
• Approximately 2 oz of water is absorbed for every 1 oz of coffee.
problem
6