34481 011403
STEP 6
STEP 8
STEP 7
STEP 9
STEP 10
STEP 12
STEP 14
STEP 11
STEP 15
Unscrew the inlet cap.
Pull out lid assembly.
Clean inlet tube with the
medium sized brush (BOM
#00675.0000) and clean-
ing product solution.
Rinse well. Reassemble
the lid making sure to re-
place the retainer cap.
Clean the sight gauge with
the large brush (BOM
#00674.0000) and reas-
semble.
Remove the glass tube.
Make sure reservoir is
empty and unscrew the
sight gauge cap.
Use a clean damp cloth
rinsed in nonabrasive,
mild detergent to clean all
surfaces.
Thoroughly rinse entire
inside of the server.
DO
NOT
immerse server in
water.
STEP 13
Reinstall glass tube and
the sight gauge cap.
Use a small brush (BOM
#00674.0000) to thor-
oughly scrub the faucet
shank.
Allow the parts to soak in a
sanitizer solution for a mini-
mum of ten minutes. Re-
move the faucet parts from
the sanitizer solution and
rinse thoroughly. Allow
parts to air dry over night.
Transfer these parts to a
three compartment sink
for cleaning. Fill the first
sink with a soap solution
using a mild detergent, the
second sink with a sani-
tizer solution (75
°
F warm
chlorine solution of at least
50-100 ppm) and the third
sink is used for clean rinse.
STEP 16
STEP 17
STEP 18
STEP 19
STEP 20
Turn the faucet wing nut
in a clockwise direction
and remove the faucet
from the dispenser. Un-
screw the faucet cap from
the faucet body and dis-
assemble all faucet parts.
Use a small brush (BOM
#00674.0000) to thor-
oughly scrub the faucet
body.
CLEANING (Continued)
USE & CARE INSTRUCTIONS for BrewWISE
SM
System
(Includes G92T DBC Grinder and DUAL SH DBC Brewer with Smart Funnel™)
BUNN
®
