BUNN
®
practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Dimensions & Specifications
Bunn-O-Matic
®
Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
Model
Product #
Volts
Amps Tank Heater Total
Brewing
Cubic Shipping
Cord
Watts Watts Capacity Ft. Weight Attached
CW15-APS*
23001.0000
120
11.4
1320
1370
3.8 gal./hr.
5.0
28 lbs.
Yes
†
CW15-APS***
23001.0062
120
11.4
1320
1370
3.8 gal./hr.
5.0
28 lbs.
Yes
†
CWT15-APS
23001.0003
120
11.4
1320
1370
3.8 gal./hr.
5.0
29 lbs.
Yes
†
CWTF15-APS**
23001.0017
120
11.4
1320
1370
3.8 gal./hr.
5.1
38 lbs.
Yes
†
CWTF15-APS
23001.0006
120
11
1320
1370
3.8 gal./hr.
5.0
33 lbs.
Yes
†
CWTF15-APS***
23001.0051
120
11.4
1320
1370
3.8 gal./hr.
5.2
37 lbs.
Yes
†
CWTF20-APS
23001.0007
120
15.4
1800
1850
5.1 gal./hr.
5.0
32 lbs.
No
CWTF35-APS
23001.0008 120/208-240 15
3500
3550
7.5 gal./hr.
5.0
33 lbs.
No
CWTF35-APS**
23001.0023 120/208-240 15
3500
3550
7.5 gal./hr.
5.0
33 lbs.
No
CWTF35-APS***
23001.0052 120/208-240 15
3500
3550
7.5 gal./hr.
5.2
37 lbs.
No
*Pourover model. **Stainless steel funnel. ***Model has gourmet funnel.
†
Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Brewing capacity:
based upon incoming water temp of 60ºF/15˚C (140ºF/60˚C rise) per 1/2 gallon brew time of 4 minutes.
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
Electrical: CW15-APS, CWT15-APS & CWTF15-APS - require 2-wires plus ground service rated 120V, single phase, 60Hz.
CWTF20-APS - requires 2-wires plus ground service rated 120V, single phase, 60Hz.
CWT35-APS and CWTF35-APS - require 3-wires plus ground service rated 120/240V, single phase, 60Hz.
Plumbing: 20-90 psi (138-621 kPa). Supplied with
1
⁄
4
" (6.4 mm) male flare fitting.
TERMINAL LUG
("A" MODELS-CE)
(.250 OD TUBE X 45 FLARE)
WATER SUPPLY CONNECTION
MACHINES ONLY)
(ON 15 AMP 120V
POWER CORD
OFF
ON
BLK PLASTIC
FUNNEL SHOWN
18.5
23.6
8.8
15.6
1.9
2.3
1.
.4
1.0
16.3
6.9
1.0
.4
2.2
14.4 (BLK PLASTIC)
14.3 (WIDE SST)
OPTIONAL UTILITY COVER
(CUSTOMER TO INSTALL)
4.0
13.1 GOURMET
SST NARROW
LIFT FO
R
HOT WATE
R
9/13 © Bunn-O-Matic Corporation
