Bunkers SIDE LADDER BUNK Series Скачать руководство пользователя страница 3

Страница: 3 / 5

SIDE LADDER BUNK ASSEMBLY

Single, King Single, Double & Queen

www.bunkers.com.au | 1300 66 17 64

Place Long Safety Rail inside Frame Post, align with top of post & fasten.

Centre Long Safety Spacer rail between Safety Rail & Side Rail then fasten

Insert dowels into frame. Tap in until fully inserted.

Position Ladder Rungs onto dowels.

x4 Dowel

Place Slats onto Side Rails. Align with one end of side cleat

& fasten through hole provided. Stretch to align other end

of side cleat & secure remaining screws.

x12 Screw

Align

SINGLE & KING SINGLE

DOUBLE & QUEEN

Align

x6 Screw

Single or King Single

x16 Screw

Double or Queen

Place Slats onto Side Rails.

Align with one end of side cleat & fasten through hole provided.

Repeat opposite end with second slat.

Stretch both to create middle gap between 50-95mm & secure.

Содержание SIDE LADDER BUNK Series

Страница 2: ... Attach by placing bolt E through post hole aligning with t nut thread inside Side Rail Finger tighten bolts Attach the bottom Side Rails Attach all remaining fasteners Attach Side Rails to Foot Frame x2 Bolt Washer Finger tighten only E E Then tighten all bolts with allen key 1 2 3 x12 Bolt Washer E x2 Bolt Washer E Finger tighten only ...

Страница 4: ...en www bunkers com au 1300 66 17 64 4 Attach the Brackets to Ladder Upright using guide holes Hook S Bracket on Side Rails Fasten Bolts through Upright Post to secure Ladder Rungs Secure Bracket to the side rails x8 Screw A x2 Bolt Washer D x4 Screw B 7 8 9 ...