Page 6
For technical questions, please call 1-888-866-5797.
Item 64734
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Initial Battery Charging
Before the Security Light can operate properly, the
battery needs to be fully charged. To charge the battery:
1. Turn OFF the Power Switch.
2.
Expose the Solar Panel to 3 DAYS OF FULL
DIRECT SUNLIGHT
to fully charge the battery.
3. After charging, turn the Power Switch to
Auto. The Lamp will illuminate for a short
time when first switched to Auto. This
indicates that the unit is working properly.
CAUTION
The UNIT WILL NOT FUNCTION
UNLESS:
The Solar Panel is first charged for
3 DAYS OF FULL SUN
with the SENSOR POWER OFF.
Power Switch
The Power Switch, located under the Battery
Housing of the Lamp, has three settings:
AUTO: The Lamp will illuminate automatically when
motion is detected by the Motion Sensor Head.
OFF: Center position is power off.
ON: The Lamp stay illuminated
functioning as a normal light.
AUTO
OFF
ON
Motion Detector Control Knobs
The Security Light has three different Control Knobs
on the underside of the Motion Detector Head. They
control the Motion Detector Head’s sensor. They are:
a. Sensor’s sensitivity to motion (SENS)
b. Light duration (TIME)
c. Sensitivity to light level (LUX)
NOTE:
After each adjustment, walk the detection
area to verify the adjustment made.
Underside of Motion
Detector Head
SENS
Adjusting
Knob
LUX
Adjusting
Knob
TIME Adjusting Knob
SENS TIME
LUX
SAFETY
OPERA
TION
MAINTENANCE
SETUP
