background image

IMITATION DOME CAMERA With LED  

ASSEMBLY AND OPERATING INSTRUCTIONS

95154

Visit our website at: http://www.harborfreight.com

 

Read this material before using this product. 
Failure to do so can result in serious injury. 

SaVe thiS manual.

Copyright

©

  2006  by  Harbor  Freight  Tools

®

.    All  rights  reserved.    No  portion  of  this  manual  or  any  artwork 

contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight 

Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing improvements, actual 

product may differ slightly from the product described herein.  Tools required for assembly and service may not 

be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 09k

Содержание 95154

Страница 1: ...s reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included For technica...

Страница 2: ...nt Read all instructions before using this product 1 Keep work area clean and well lit Cluttered areas invite injuries 2 Observe work area conditions Do not use the Imitation Dome Camera in damp or wet locations Don t expose to rain Do not use electrically powered products in the presence of flammable gases or liquids 3 Keep children away Children must never be allowed in the work area Do not let ...

Страница 3: ...lexes are impaired while taking drugs If there is any doubt do not install the unit 12 Only use 1 5V DC AA Batteries Always properly dispose of used batteries in accordance to the guidelines for waste disposal in your community 13 Unpacking When unpacking check to make sure that the product is intact and undamaged If any part are missing or broken please call Harbor Freight Tools at 1 800 444 3353...

Страница 4: ...ail through the pattern into the mounting surface Attach the screws to the mounting surface leaving about a 1 4 of the screws shanks exposed Warning When mounting be sure to avoid hammering into any electrical wiring 3 After the two mounting screw have been attached to the wall or ceiling place the two mounting holes on the camera over the screw heads Press the Dome Camera over the screw heads and...

Отзывы: