(1) Quick release: open the quick release clamp, put the seat post into the frame
tube, adjust the seat height, than close the clamp tight.
(2) Screw clamp: use a hexwrench to loosen the screw, put the seat post into
the frame tube, adjust the seat height, then tighten the screw.
Adjust the saddle height subject to the bicycle you bought, the clamp must be
closed tight and the safety line on the post must be covered by frame tube!
The saddle height can be adjusted to fit the kids' height. It must be set at the
point when the kid can reach the ground with his tip toes. Make sure the seat
clamp screw is tight after each adjustment.
Please tighen all the valves on the bicycle rim and other small parts with tools so
that kids can't remove or eat them. If there are parts like a screw or a valve is broken
or loose, fix them immediately and don't ride it until it is fixed.
5
6
3
Safety instructions
!
(WARNING: Mind the minimum insert mark on the seat post! It
must be inside the frame tube!)
