hellas-manual-en
Page 4 / 9
Intended Use
Exposure of positive or negative developing photoresist, solder mask and Alucorex.
All other application need our written consent or happen on risk of the operator.
The Bungard GmbH & Co. KG accepts no liability for damages incurred in non-authorised use or
application of the machine.
Safety instructions
Generally
Please read the following text carefully and pay particular attention to the information on
occupational safety and commissioning.
Please keep this folder carefully. It contains information that is also important for later
maintenance or cleaning work.
The machines are not intended for integration or interconnection with other machines or
systems. They may only be operated in rooms equipped for this purpose and may only be
operated by qualified specialist personnel. Keep children and pets away!
The Hellas is designed for use in the laboratory. The device may only be serviced by a qualified
specialist. The user should never try to do more for the maintenance of his device than is
allowed to do according to the operating instructions. He should always consult a specialist for
maintenance work that is beyond his authority.
transport
Use only suitable lifting and transport equipment such as forklifts or pallet trucks. Secure the
machine against slipping / tipping. Risk of damage!
site
The machine needs a flat table of approx. 700 x 800mm. There must be sufficient space
around the machine for operation and maintenance.
Do not place the device near heat sources such as radiators, warm air ducts, ovens and the
like.
The installation environment is crucial for problem-free work with the Hellas. You must therefore
place particular emphasis on a room that is as dust-free as possible and room air free of
corrosive vapors in order to ensure that it functions properly.
Electrical
The machine is manufactured using tested parts according to the usual guidelines for electrical
safety. However, this does not release the user from his duty of care when handling electrically
operated devices.
Only connect the device to the power source marked in the operating instructions or on the
device. We assume that the power source will be protected on-site. The connection to the
power supply may only be carried out by a specialist.
The circuit and the fault circuit must be protected by the customer.
Before starting any work on the machine (cleaning, etc.) and when not in use for a long time,
switch off the machine and pull out the mains plug.
fluorescent tubes
Due to the high intensity of the emitted light, it is u. It may be uncomfortable to look into the
fluorescent tubes that are switched on. However, the danger of the emitted UV light is just as
low as that of tube-equipped tanning devices. Intended use is in the closed state to avoid eye
injuries
Avoid contamination with iron chloride. Because of its reddish-brown color, they lead to a partial
absorption of UV light.
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
