EXP3040-manual-en
Page 7 / 8
Maintenance
There is only little maintenance necessary for the EXP3040 LED exposure set. The vacuum pump,
for instance, is maintenance free. To protect it from dirt and dust, there is a filter put in front of it.
We want to tear your special attention to a careful maintenance of the vacuum foil. It should be
cleaned regularly using water and a soft detergent. Do not use solvents.
Be extremely careful not to contaminate the foil with spots of developer or etching liquid.
Do not put pieces with an height of more than about 5 mm under the frame. This could lead to
serious deformation or even cuts in the foil.
Spare Part List
EXP3040 LED Vakuumrahmen
EXP3040 LED Vacuum frame
640002
EXP3040 LED Reparatur Vakuumrah-
men
repair of EXP3040 LED vacuum frame
640003
EXP3040 LED Vakuumpumpe
EXP3040 LED vacuum pump
640005
EXP3040 LED Glasplatte
EXP3040 LED glass plate
640006
EXP3040 LED Leuchteinheit
EXP3040 LED LED-unit
640010
EXP3040 LED Manometer
EXP3040 LED Manometer
6000
Schaumklebeband für EXP3040 LED
Platte/Vakuumrahmen 2 m
Foam tape for EXP3040 LED plate / vacuum
frame 2 m
EXP3040 LED Reparatur-Kit Vakuum-
rahmen(Folie+Dichtung)
repair set of EXP3040 LED vacuum
frame(black rubber tape & transparent plastic
sheet)
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
