Bundutec BunduAwn, Руководство пользователя

Страница: 6 / 12

How does it work?
The awning works with five to six arms which, when open, allows coverage of 2 or 3 sides of your
vehicle. The arms work in a triangular force which gives the awning more strength. By covering
three sides the triangular structure is complete and gives additional structural support.
On the L Shape awns this triangular structure is absent, which is why you need to have a support
pole.
When each arm is opened, another small arm situated on top of the main arm, pops up and
provides additional height to the slope of the roof to give better water drainage and prevents large
pockets of water collecting on top of your awning.
The bag of the awning, when open, closes the gap between your vehicle and the awning to prevent
water running down the side of your vehicle. It is essentially a gutter while your awning is open.
Ensure the awn is taut for maximum water run off.
PLEASE NOTE that if you open the awning both arms should not be opened at the same time as this
will result in damage. Open one arm and then the other. It does not matter which arm is opened
first as long as they are not both opened at the same time.
When closing the awn it is better to fold the awn than to roll it as it then fits better in the bag and
does not put unnecessary strain on the zip on the bag.
Also check that the lifter arms lower properly and does not hook on anything.
Our awnings have a one year mechanical warranty, which does not cover user error.
How do i fit the awning myself?
When installing the awning, we advise that there is no more than a 0.5m unsupported overhang.
You can order brackets with your awn order. They have been made longer than necessary so that
you can adjust the height of your awning.
When installing the awning make sure that you have support running from the ends of the awning if
the mounting brackets are further than 500mm from the ends of the awning.
Regular Fitment:
Fit your T brackets to your vehicle. Fit the awning to the brackets. The awning can be bolted on with
a minimum of 4, preferably 6 bolts.
6
Roofrack Sqr Tube
Awn