BUMBER PANBB305-016 Miami, Инструкция по эксплуатации

Страница: 7 / 11

6
1.
Install the net J. on the hoop I. as shown.
2.
Fill the base S. preferably with fine sand or water to ensure maximum stability.
3.
Assemble the middle pole X. and the lower pole Y. and fix them with the bolts D1., D2.
and D3.
4.
Insert the lower Y-post into the front of the S-base. Secure them together with the F1
bolts. and F2. Then insert the 2 wheels G. in the base S. thanks to the 2 wheel shafts M.
5.
Attach 2 ends of the L1 fixing rods. and L2. on both sides of the base S. thanks to bolts C1.,
C2. and C3.
6.
Secure the other ends of the L1 fixing rods. and L2. on the lower pole Y. thanks to the
bolts E1., E2. and E3.
7.
Install the I. hoop and W. top post on the K panel using bolts B1., B2. and B3.
8.
Attach the upper post W. to the middle pole X. and adjust to the desired height by
securing the assembly with plastic handle A. and bolts D1., D2. and D3. If you wish to
change the height, change the hole screws on the upper post W.
9.
Assemble the middle pole X. and the lower pole Y. and fix them with the screws D1., D2.
and D3.
ENGLISH
ASSEMBLY OF BASKETball stand