THE HOURLY CHIME
When activated passage of time is marked by a beep every hour
on the hour.To activate or deactivate the Hourly Chime, in the
Normal Time or Calendar displays, press and hold C button, at the
same time press and release B button (when Hourly Chime is
activated, the bell symbol will appear and the colon will flash).
THE CHRONOGRAPH (STOP WATCH)
Press and release D button until the
Chronograph Display appears.
To start Chronograph, press and
release B button. Press and release B
button to stop. Press and release C
button to reset Chronograph to zero.
THE SPLIT OR LAP TIME INDICATOR
With the chronograph counting Split or Lap time can be obtained
by using C button.The S indicator will appear and the display will
freeze.
After taking a Lap reading, you will return to the counting
Chronograph with the C button.Take as many intermediary
readings as you wish (press C button).
To reset it to zero from Chronograph, updating press and release
B button, then press and release C button.
The Chronograph counts up to one Hour then repeats. Every
button activation is accompanied by a beep if the Hourly chime is
activated.
Note:
From stop or counting Chronograph you can change to other
functions by using D button without altering the contents of the
memory.
NIGHT LIGHT
To enable you to read the display in the dark, your watch has been
equipped with a built-in Night Light, merely press B button to
illuminate the display.
2/2001
Page 2 of 2
