POWER INSTALLATION
The dartboard is designed to be powered by an AC to 5V DC, 500 milliamp (minimum) adapter.
For the DC adapter, it is with the DC plug polarity configured as positive (+) outside, and
negative (-) center. To connect by adapter, plug the DC plug insert into the DC power jack and the
AC plug into an electrical outlet.
During use:
ensure the connecting cable does not present a tripping or other hazard.
After using the dartboard:
switch off the power at the mains and unplug the adapter
from the mains and dartboard.
Never leave the adapter connected to the dartboard when not in use.
Stow the adapter safely away when not in use.
IMPORTANT NOTE
3.
During shipping or during the course of normal play it is possible for scoring segments of
the board to become temporarily jammed, resulting in a frozen segment. If this occurs, the
score of the segment that is stuck will be counted and displayed when the player changes.
Take the following steps when this error appears:
a.
Find the segment that is stuck (the segment that keeps counting score).
b.
Press firmly down on the jammed segment until it breaks free and loose. Once unstuck,
the error should be gone and the board should continue to operate normally.
4.
This game is designed for use with softtip darts only. Do not attempt to use steeltip darts or a
softtip dart with a tip exceeding 2,5 cm.
5.
Electronic and mechanical reaction time is required between shots. If two throws occur too
soon after each other, pull out the second dart and re-throw to properly record your score.
6.
Under the environment with electrical fast transient the dart game may malfunction and
require use to reset the dart game.
7.
This is an adult game which can include potential sharp (softtip) points. Children should
only play under adult supervision.
8.
Please peel off the protective film at the display area before use.
