4
!
This engine is intended for model cars.
Do not attempt to use it for any other
purpose.
Mount the engine in your model
securely, following the manufacturers'
recommendations, using appropriate
screws and locknuts.
Install an effective silencer (muffler).
Frequent close exposure to a noisy
exhaust (especially in the case of the
more powerful highspeed engines)
may eventually impair your hearing
and such noise is also likely to cause
annoyance to others over a wide area.
The wearing of safety glasses is also
strongly recommended.
Take care that the glowplug clip or
battery leads do not come into contact
with rotating parts. Also check that the
linkage to the throttle arm is secure.
For their safety, keep all onlookers
(especially small children) well back
(at least 20 feet or 6 meters) when
preparing your model for running.
NOTES
•
•
•
•
•
•
5
!
NOTES
To stop the engine, fully retard the
throttle stick and trim lever on the
trans-mitter, or, in an emergency, cut
off the fuel supply by pinching the fuel
delivery line from the tank.
•
Warning! Immediately after a glowplug-
ignition engine has been run and is still
warm, conditions sometimes exist
whereby it is just possible for the engine
to abruptly restart if it is rotated over
compression WITHOUT the glowplug
battery being reconnected.
•
Before starting the engine, always check
the tightness of all the screws and nuts
especially those of joint and movable
parts such as throttle arm. Missing
retightening the loose screws and nuts
often causes the parts breakage that is
capable of harming you.
4
!
This engine is intended for model cars.
Do not attempt to use it for any other
purpose.
Mount the engine in your model
securely, following the manufacturers'
recommendations, using appropriate
screws and locknuts.
Install an effective silencer (muffler).
Frequent close exposure to a noisy
exhaust (especially in the case of the
more powerful highspeed engines)
may eventually impair your hearing
and such noise is also likely to cause
annoyance to others over a wide area.
The wearing of safety glasses is also
strongly recommended.
Take care that the glowplug clip or
battery leads do not come into contact
with rotating parts. Also check that the
linkage to the throttle arm is secure.
For their safety, keep all onlookers
(especially small children) well back
(at least 20 feet or 6 meters) when
preparing your model for running.
NOTES
•
•
•
•
•
•
5
!
NOTES
To stop the engine, fully retard the
throttle stick and trim lever on the
trans-mitter, or, in an emergency, cut
off the fuel supply by pinching the fuel
delivery line from the tank.
•
Warning! Immediately after a glowplug-
ignition engine has been run and is still
warm, conditions sometimes exist
whereby it is just possible for the engine
to abruptly restart if it is rotated over
compression WITHOUT the glowplug
battery being reconnected.
•
Before starting the engine, always check
the tightness of all the screws and nuts
especially those of joint and movable
parts such as throttle arm. Missing
retightening the loose screws and nuts
often causes the parts breakage that is
capable of harming you.
8
ABOUT THE WARRANTY
Since this is a special version
of the
MAX-
21XZ-B, individual
special parts are available
only for limited period (one
year after finishing the
production).
Also, the engine is free of
warranty due to damage
and/or wear occurred during
running.
As delivered, the engine has the
carburetor lightly fit into its intake.
Secure it changing its angle
according to the car chassis.
NOTE
Please do not run on a public street, this
could cause serious accidents, personal
injuries and/or propetry damage.
Please do not run near pedestrians or
small children.
Please do not run in small or confined
areas.
Please do not run where loud noises can
disturb others, such as hospitals and
residential areas.
While Operating
NOTES ON OPERATION
9
Standard accessories
Glow Plug P3 T-type head (Turbo head)
1piece
Exhaust Seal Ring 1piece
Dust Cap 3, 16, 18 1piece each
Carburetor Reducer 6mm & 7mm
1piece each (w/ "O" Ring)
(Hot Type)
ABOUT THE ENGINE
The O.S. SPEED 21XZ-B is a high
performance engine produced by
O.S.’s SPEED TEAM technicians.
Based on the MAX-21XZ-B, major parts
have been refined to have a powerful
potential equal to more expensive
specially tuned or modified engines.