P3
P3 P4
P4
P1
P1
P2
P2
P5
P5
1. To lock the rocking skid lock, first lift the front of the rocking runner slightly and turn the foot (A) right and left
towards the ground to the magnetic cylinder head screw (E).
2. Repeat the procedure at the back side of the runners with the 2 adjustable feet (B).
3. To return the ROCKfrog to rocking position, start at the back (in reverse order) and turn the rocking locks back
onto the magnetic cylinder head screws.
Use of the rocking skid lock:
4 x cylinder head
screw with magnet
E
8 x cap nuts
F
4 x spring washers
G
B
B
C
C
A
A
2 x front side feet
A
2 x back side feet
B
B
A
C
C
D
E
E
D
G
F
F
P1
P1
P2
P2
C
D
OD2211 ECKfrog
© 2 0 2 2
K U R T B E I E R & K A T I Q U I N G E R
G
Front side
Assembly of the rocking skid lock:
Package scope (FP):
4 x round-head bolt
D
Front side
Back side
Back side
Rocking skid lock
Unlocking the
rocking skid lock
1. Screw in hand-tight one foot (A/B) each into the runners from the inside (at the 4 positions P1) using a
round-headed bolt (D) and a spring washer (G) (note "front" and "rear" here).
2. Secure the bolts (D) with one cap nut (F) each and tighten them.
3. Screw the 4 cylinder head screws (E) into the runners from the inside at the 4 positions (P2).
4. Secure the screws (E) with one cap nut (F) each.
