4WD Awning
8
Closing and Storing the Awning
1. Remove the guy ropes and pegs from the awning and extension (if applicable) and store them in the
supplied bag.
Note
: If the extension is in use, remove it from the awning
– it is either attached to a support arm using
Velcro straps, or must be slid from the groove in the outer rail. Roll up the extension and use the Velcro
straps to keep it from unrolling.
2. Undo the Velcro straps securing the awning to the
support arms (
A
). Retract the support arms then
swing them back into the awning rail.
3. Hold the end of the awning, then retract the leg (
B
)
on either side and swing it up and into the outer rail
(
C
).
4. Proceed to roll the awning (
D
) up as shown. When
completely folded, use the Velcro straps to secure it
(and the extension, if applicable) to the awning rail.
5. Place the awning cover in position, place the peg
and rope bag inside and fully zip the cover closed.
D
A
C
B
