9
1.6
Installation of the Network IP Camera
Please follow the instructions below to setup your new IP camera.
1.
Connect Ethernet cable to LAN port.
2.
Plug DC power adapter to power outlet on the wall.
3.
Connect DC power cable to IP Camera’s DC power connector.
4.
If everything’s ok, you should see the left LED light on LAN port light
up. If not, please recheck every step and try again, or ask your dealer
of purchase for help.
5.
Unplug the power then find the screws in the package, use
screwdriver to fix the sun shield on the device’s main body.
6.
Secure the bracket of bullet camera on the wall.
7.
Repower on the camera and refer to the following procedures to
access and configure it.
Содержание BU7217
Страница 1: ...0 3M IP Camera Bullet WDR PoE User Manual Release 27 May 2014...
Страница 41: ...40...
Страница 64: ...63 Set the time range then click Search then shows the records like below...
Страница 75: ...74 Certificate CE FCC Class A Physical Info WEIGHT 1200gm Camera body only DIMENSIONS 73 0mm x 233 5mm L...