Bullard SparxLift Welding PAPR, Использование и уход, Страница: 36 / 41

Maintaining the AutoLift
– Part 1
•
Assembling and disassembling the Auto Lift assembly on the
SparxLift is a simple process but should be done according to the
following instructions to ensure problem free operation of the
helmet.
•
Locate the spring (10-3L) in the recess on the outside of the
helmet shell ensuring that the end of the spring is hooked into the
hole provided and pointing upwards.
•
Springs are labeled (R/L) and if reversed the Auto Lift mechanism
will not work.
•
Place the spring retainer (10-2L) over the spring and ensure that
the tongue of the retainer is located in the slot provided on the
side of the helmet shell.
•
Mount the cartridge holder assembly over the spring retainer
ensuring that the notches in the top of the spring retainer are
nested into the matching slots on the cartridge holder assembly.
36