Bull NovaScale T840 F3, Начало работы, Страница: 8 / 32

The connectors on the back of your system have icons indicating which cable to plug
into each connector. Be sure to tighten the screws (if any) on the monitor's cable
connector.
1.2.3 Connecting The Power Cable(s)
Figure 1-2.
Connecting the Power Cable(s)
Connect the system’s power cable(s) to the system and, if a monitor is used, connect
the monitor’s power cable to the monitor.
1.2.4 Securing The Power Cable(s)
Figure 1-3. Securing the Power Cable(s)
Bend the system power cable(s), as shown in the illustration, and attach to the cable
strap.
Plug the other end of the power cable(s) into a grounded electrical outlet or a
separate power source such as an uninterruptible power supply (UPS) or a
power distribution unit (PDU).
Bull NovaScale T840 F3 Getting Started Guide 2