Bull NovaScale T810B F2, Руководство пользователя, Страница: 12 / 34

8
Getting Started With Your System
12 After the drivers are extracted, USC prompts you to insert the operating
system installation media.
13 Insert the operating system installation media when prompted and click Next .
NOTE:
USC supports internal SATA optical drives and USB optical drives. If the
installation media is corrupt or not readable, then USC may be unable to detect the presence
of a supported optical drive. In this case, you may receive an error message stating that no
optical drive is available. If the media is not valid (if it is the incorrect CD or DVD, for
example), a message displays requesting that you insert the correct installation media
14 Click Finish to reboot the system and continue with the operating system
installation. Upon reboot, the system boots to the operating system
installation media.
NOTE:
When the system reboots after you click Finish, you may be prompted to press a
key before booting to the operating system installation media. If you do not press a key, the
system boots to the hard drive and not the operating system installation media.
NOTE:
: In the event that the operating system installation is interrupted and the system
reboots before installation completes, you may be prompted to press a key in order to boot
from the operating system installation media.
NOTE:
You can cancel the operating system installation by pressing the <F10> key.
Pressing the <F10> key at any point during the installation process or while rebooting causes
any drivers provided by the OS Deployment wizard to be removed.