Bull NovaScale 4020, Руководство пользователя, Страница: 57 / 173

Configuration Software and Utilities
41
Sub Menu Item Default Value Description
VT-UTF8 ANSI is the standard PC-type terminal
Remote Console Reset [Disabled]
Enabled Enables remote reset via escape key sequence;
ESC R ESC r ESC R
ACPI OS Headless
Operation Disabled
Same as BIOS
Serial Port Passes information about serial redirection to ACPI OS.
ACIP OS Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K Available only when ACPI OS Headless Operation is the
same as BIOS or serial port.
ACPI OS Flow Control No Flow Control
[CTS/RTS]
XON/XOFF
CTS/RTS + CD Available only when ACPI OS Headless Operation is the
same as BIOS or serial port. Options are passed to the
operating system.
ACPI OS Terminal
Type PC-ANSI
VT100+
VT-UTF8 Available only when ACPI OS Headless Operation is the
same as BIOS or serial port. Options are passed to the
operating system.
Exit
Table 13 describes the menu items available on the Exit screen. Default values appear in
brackets.
Table 13. BIOS Setup Exit Screen Menu Items
Menu Item Description
Exit Saving Changes Lets you exit Setup with or without saving your changes in CMOS. Clicking
on the menu item causes the system to prompt you for a Yes or No
response.
Yes Saves your changes and exits the utility.
No Discards your changes and exits the utility.
Exit Discarding Changes Lets you exit Setup with or without discarding your changes. Clicking on the
menu item causes the system to prompt you for a Yes or No response.
Yes Discards your changes and exits the utility.
No Saves your changes and exits the utility.
Load Setup Defaults Lets you load Setup with factory defaults. Clicking on the menu item causes
the system to prompt you for a Yes or No response.
Yes Loads the system setup defaults.
No Aborts the action.
Load Custom Defaults
(This menu is not
available until POST
platform release) Lets you load Setup with custom defaults. Clicking on the menu item causes
the system to prompt you for a Yes or No response.
Yes Loads setup values from a file previously saved through the Save
Custom Defaults menu item. You must specify the file name.
No Aborts the action.
Save Custom Defaults Stores current CMOS settings in custom default CMOS area (flash).
Discard Changes Lets you discard the changed values you have accumulated during this
setup session. Clicking on the menu item causes the system to prompt you
for a Yes or No response.
Yes Discards the setup values for the current setup utility session.
No Aborts the action.