Bull LP6000, Руководство по установке и настройке

Страница: 20 / 44

2-4
Fibre Channel Adapters Installation & Configuration Guide
If this command fails, perform the tasks described below:
–
Unmount disks
umount filesystem
for mounted file systems
varyoffvg –s volumegroup
for all the corresponding Volume Groups
–
if ATF is installed, remove the
atf
objects:
rmdev –Rl atf(i)
–
if Navisphere is running, stop it:
rc.navi stop
–
Restart the
rmdev –Rl fchan(i)
command for each Fibre Channel adapter.
3. There is no specific action to upgrade 1.2.12.x version to 1.3.3.x version: just install the
new packages, then reboot your system.
4. Use the
SMIT
interface (or
installp
command) to install the LPP on your system. Logged
as
root
user, type:
smit install_latest
If you are not familiar with the AIX installation procedure, refer to the
AIX Installation Guide
for more information.
5. Check the software installation with the
lslpp
command.
Install the Adapter in the System
Refer to the system documentation for the procedure for installing an adapter.
•
Power off your machine.
•
Remove the front cover, side cover or rear cover, according to your system to access the
planar.
If necessary, refer to the corresponding Installation Guide.
•
Remove the rear cover in order to remove the cache, if any, in front of the slot where you
choose to install the Fibre Channel Board.
•
Plug the board in the chosen slot and secure it by screwing in the connector at the rear of
the planar. Put the cover back in its place.
•
Power on your machine.
•
Check the status.
The devices corresponding to the boards (fchan0, fchan1, ...), the remote Fibre Channel
Ports (fcp0,1), and the network interfaces (fe0, fe1, ...) are automatically created at boot
time.
Check that fchan and fcp are available, using the
lsdev
command.
lsdev –Cc adapter
lsdev –Cc driver
lsdev –Cc if (network interfaces)
Note:
Disks connected to Fibre Channel adapters are not bootable.
Connect the Attachment Cables
Connect the cables corresponding to the Fibre Channel Adapter. Refer to the following
figures for cabling characteristics. For more information about cabling, refer to:
•
DAS3500 Installation and Service Guide for Rackmount Models 86 A1 47JX.
•
DAS3500 Installation and Service Guide for Deskside Models 86 A1 48JX.
•
DAS4500 Series Deskside Models Installation and Service Guide 86 A1 01EF.
•
DAS4500 Series Rackmount Models Installation and Service Guide 86 A1 02EF.