manualshive.com logo in svg

Bull Escala PL 1650R-L+, Информация о оборудовании

Поделиться
Скачать
Bull Escala PL 1650R-L+ Скачать руководство пользователя страница 7

Control panel

The following procedures describe the removal and replacement of the control panel (also known as the
operator panel) for the models listed below. Also listed below are procedures to remove and replace the
control-panel signal cable and control panel fillers, if applicable.

Model 112/85, ESCALA PL 250T/R, ESCALA PL 450T/R control panels

• 

Model ESCALA PL 250R-VL or ESCALA PL 450R-XS control panel

• 

Model ESCALA PL 250R-L, PL 250R-L+ or PL 450R-VL+, and ESCALA PL 250R-L+ or ESCALA
PL 450R-VL+ control panels

• 

Model ESCALA PL 850R/PL 1650R/R+ and ESCALA PL 1650R-L+ control panel

• 

Model ESCALA PL 245T/R control panel

• 

Model 112/85, ESCALA PL 250T/R, ESCALA PL 450T/R control panels

These procedures describe the removal and replacement of the control panel in the following servers:

112/85

• 

ESCALA PL 250T/R

• 

ESCALA PL 450T/R

• 

7/20

• 

Replacing this feature is a customer task. You can perform this task yourself, or contact a service provider to
perform the task for you. You might be charged a fee by the service provider for this service.

Select the appropriate instructions from this list:

Remove the control panel with power on

• 

Replace the control panel with power on

• 

Remove the control panel with power off

• 

Replace the control panel with power off

• 

Model 112/85, ESCALA PL 250T/R, ESCALA PL 450T/R control panel fillers

• 

Model 112/85, ESCALA PL 250T/R, ESCALA PL 450T/R control-panel signal cables

• 

Parent topic:

Control panel

Remove the control panel with power on

These procedures describe the removal of the control panel with power on for the server models listed in

Model 112/85, ESCALA PL 250T/R, ESCALA PL 450T/R control panels

.

Be sure you read these instructions carefully and understand the complexity of the power on procedure before
you begin. If you do not feel comfortable using this procedure, go to 

Remove the control panel with power off

.

Attention:

 Failure to follow these instructions could result in damage to the media device or to the system unit

and could result in loss of data.

If your system is managed by the Hardware Management Console (HMC), use the HMC to complete the
steps for removing a control panel. For instructions, see 

Remove a part using the Hardware Management

Console

.

Prerequisites

To remove a control panel with the system power on, you must first complete the following items:

Control panel

1

Содержание Escala PL 1650R-L+



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды