INSTALLATION INSTRUCTIONS
IMPORTANT:
Be sure that the warming drawer is properly grounded and installed by a qualified technician. The electrical cord has a 3 prong plug, do not cut
any of the prongs.
Make sure that the island is free of cracks that would allow water or other liquids to get into the electrical controls.
Keep the warming drawer away from water sprinklers.
When not in use, cover the island to protect from rain and harsh weather conditions.
ISLAND INSTALLATION
The warming drawer requires a wall opening of the following dimensions:
See picture below.
Provide support beams using metal studs.
Pull the drawer out of the drawer casing to gain access on the mounting holder at the front of the casing.
Insert the drawer casing into the island opening.
Secure the drawer casing with screws at the inside front top and bottom, using the pre-punched mounting holes.
Re-assemble the drawer section into the drawer casing.
Apply weather proof sealant along the edges of the warmer.
Plug in the warmer to a weather proof, and properly grounded, electrical outlet.
3
READ CAREFULLY BEFORE INSTALLATION OF YOUR WARMING DRAWER
