Bull 58/87 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 50

background image

Generelle Informationen:

Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse A

.

Electromagnetic Interference (EMI) Statement - Russia

Class B Notices

The following Class B statements apply to features designated as electromagnetic compatibility (EMC)
Class B in the feature installation information.

Federal Communications Commission (FCC) statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

v

Reorient or relocate the receiving antenna.

v

Increase the separation between the equipment and receiver.

v

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

v

Consult an IBM-authorized dealer or service representative for help.

Properly shielded and grounded cables and connectors must be used in order to meet FCC emission
limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible for
any radio or television interference caused by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Industry Canada Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

32

Power systems: Service procedures for the PCIe storage enclosure

«
...
42
43
44
45
46
...
»

Содержание 58/87



















































Отзывы:

Нет отзывов

Похожие инструкции для 58/87

Бренд: ECKELMANN Страницы: 134

totalstorage 200

Бренд: IBM Страницы: 180

DiskStation DS214play

Бренд: Synology Страницы: 16

Бренд: iStorage Страницы: 23

Бренд: LevelOne Страницы: 85

Бренд: Oracle Страницы: 268

Бренд: Lakeshore Страницы: 7

Бренд: Pollard Страницы: 3

WD10000AH1U - Mac Edition

Бренд: Western Digital Страницы: 2

Бренд: Alpha ESS Страницы: 76

Бренд: Heartland Страницы: 62

Бренд: OLT Страницы: 35

Бренд: Ensurity Technologies Страницы: 75

SuperServer SSG-620P-E1CR24H

Бренд: Supermicro Страницы: 134

Бренд: Sunex Страницы: 4

Бренд: Renkforce Страницы: 4

Бренд: ABSCO SHEDS Страницы: 42

Бренд: ABSCO SHEDS Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды