Bull 32X SCSI-2 CD-ROM Drive, Инструкция по установке и использованию

Страница: 25 / 41

Chapter 4. Installing Device Driver Software
Device driver software is provided in AIX and other operating systems that support this
CD-ROM drive. However, if you should have to install device drivers, follow the
installation procedures provided in your operating system documentation. This chapter
provides instructions for installing device drivers on an AIX system.
Installing Device Drivers on an AIX System
To install device drivers, do the following:
1. At the system prompt, log in as a root user.
2. Insert the device driver media into the appropriate media device.
3. To start SMIT, type:
smit devinst
at the prompt. Press Enter. The Install Additional Device Software panel displays.
The INPUT device/directory for software option is highlighted for selection.
4. Press F4 to display a list of input devices from which you can select. The cursor is
already positioned on the input device entry field.
5. Either type the name of the input device in the entry field or select the appropriate
device, then press Enter. The Install Additional Device Software panel displays the
device you selected in the INPUT device/directory for software field. The
SOFTWARE to install option is highlighted.
6. Press F4 to display a list of the device packages you can install.
7. To display a Find dialog box, type:
/
in the field where the cursor is positioned.
8. Type the following device package name:
devices.scsi.disk.rte
9. Press F7 to select the device package name, press Enter. The Install Additional
Device Software panel displays the completed required fields.
10. Press Enter. The ARE YOU SURE list displays.
11. Press Enter. The COMMAND STATUS panel displays. The term
RUNNING
is
highlighted, indicating that the software is being installed and configured.
12. When
RUNNING
changes to
OK
, scroll to the bottom of the panel and locate the
Installation Summary. If the installation was successful,
SUCCESS
displays at the
bottom of the panel in the Result column of the Installation Summary.
13. Remove the device driver software media from the media device.
14. Press F10 to exit SMIT.
15. To shut down and restart your system, type:
shutdown -Fr
13